# How often should playground equipment be inspected? The European answer

> **Short answer:** EN 1176-7 describes three inspection levels, not one date: a frequent routine visual inspection, a less frequent operational inspection, and an annual main inspection by a competent person. How often the first two happen is set from the site: use, materials, weather and vandalism. Where a national rule exists, it asks the operator for a written plan rather than for a number. Lekko starts at 7, 75 and 365 days and lets you change all three per site.

Category: Inspection and routines · Published: 2026-08-09 · Updated: 2026-09-19 · Author: August (Lekko) · Canonical address: https://lekko.tech/eu/blog/how-often-should-a-playground-be-inspected

A facility manager in Lisbon and a kindergarten head in Brno type the same English sentence and get the same first page: supplier blogs quoting an American agency. The standard their equipment was built to says something else, and it is more useful because it does not pretend to know their site. This guide gives you the three levels, the things that move the interval, what the countries with a national rule actually ask for, and the numbers Lekko starts from.

## Three levels, and why one number cannot answer the question

**A timeline of three inspection levels: the routine visual inspection done often, the operational inspection done less often, and the annual main inspection done once a year by a competent person.**

- Routine visual inspection (Often, set from the use of the site): Glass, litter, broken parts, missing surfacing. Minutes, by whoever is on site.
- Operational inspection (Less often, set from the use of the site): Wear, stability, fixings, moving parts, surfacing depth measured. The operator's own people, with time.
- Annual main inspection (Once a year, as the name says): Structure, foundations, corrosion and rot, dimensions against the standard. A competent person.

*The three inspection levels in EN 1176-7. The first two are set from the site; the third is yearly by name.*

The levels answer different questions. The routine visual inspection asks whether anything has happened since last time: the bottle in the sand, the seat that cracked at the weekend. The operational inspection asks whether the equipment is still working as it should: the bearing that has developed play, the post that moves when pushed, the wood chips that have quietly gone from 300 mm to 150. The annual main inspection asks whether the overall level of safety is intact, including what cannot be seen from the ground. A closer operational inspection cannot stand in for a routine visual one, because it is not looking for the same thing.

## Start from the site, not from the calendar

What EN 1176-7 leaves with the operator is the rhythm of the first two levels, and it leaves it there because the operator is the only one who knows the site. These are the things that move it, and they move it in both directions.

- **How hard the site is used.** A day-care garden with forty children every morning and a courtyard in Ghent used by six are not on the same scale.
- **Climate and materials.** Salt air on the Irish west coast eats fixings; freeze and thaw in Poland and Czechia lift foundations and split timber; the sun in Andalusia makes a steel slide untouchable by noon and breaks down rubber faster than rain does.
- **Moving parts.** Swings, carousels and cableways wear where fixed frames do not.
- **Vandalism.** A site beside a school gate, a bus stop or a bar is looked at more often, not less.
- **The season.** A windy autumn and a wet winter change a site faster than a quiet week in June.
- **The manufacturer's instructions.** Where they set a closer interval for a product, that interval is the one to follow.

What a slipped rhythm looks like is on record. When the Czech Trade Inspection Authority inspected 170 playground facilities in 2017 it found shortcomings at 28, and the faults it lists are the slow kind: poor impact-absorbing material, insufficient maintenance, mechanical damage and rot. None of those arrives overnight. Each is what an operational inspection exists to catch.

## Lekko's starting values, and what they are not

**Three horizontal bars showing Lekko's default intervals: 7 days for the routine visual inspection, 75 days for the operational inspection and 365 days for the annual main inspection.**

- Routine visual inspection: 7 days — weekly to start
- Operational inspection: 75 days — four to five a year
- Annual main inspection: 365 days — yearly, by name

*The intervals Lekko starts a new site with. They are the app's defaults, not figures from EN 1176-7, and they are changed per site.*

A week is the rhythm a caretaker already has; 75 days puts four to five operational rounds into a year between the annual ones; 365 is the annual main inspection by name. All three are edited per site, and for a kindergarten garden or a campsite in July the first two are usually shortened. What is not optional is that the choice has been made and written down. An interval nobody wrote down is not an interval, it is an assumption, and it cannot be shown to anybody afterwards.

## Where a national rule sets the frame

Three countries in this market have a rule that touches inspection frequency, and it is worth seeing what they ask for, because it is not a number. In France, decree 96-1136 has whoever operates or manages a collective play area draw up a maintenance plan and keep a register. In Belgium, the royal decrees of 28 March 2001 have the operator carry out a risk analysis and draw up an inspection and maintenance scheme from it, with a logbook beside it. In the Netherlands, the manager of a playground keeps a logbook under the WAS 2023 showing that the equipment is installed, maintained and used safely.

> The pattern across all three is the same: the frequency is the operator's own written plan, derived from the site, and the record is what shows the plan was followed. That is exactly the shape EN 1176-7 describes, and it is why a plan with a rhythm and a logbook is useful in every country in this market, whichever rule you are under.

## Three sites, three rhythms

**How the same three levels land on three different sites**

| Site | Routine visual inspection | Operational inspection |
| --- | --- | --- |
| Kindergarten garden in Kraków | A morning look before the children go out, noted once a day | Closer than the default: the same children on the same equipment all year, and frost in the ground four months of it |
| Apartment courtyard in Antwerp | Weekly, by the caretaker on the same day as the bins | The default is usually fine; move it closer if the courtyard is open to the street |
| Campsite in Croatia, in season | Daily while the site is full, by the person who opens the pool | Once before opening, once mid-season, once at closing, then the annual main inspection over the winter |

## Installation, repairs and the seasons

The clock starts at installation, and new equipment gets one extra look: assembled and checked before it is used, because assembly faults are the most likely fault at that moment and never come back later. A repair restarts the same logic for the part that was repaired. And a site that closes for the winter is inspected once before it reopens, whatever the calendar says, because a winter changes surfacing, timber and foundations more than a summer of use does.

## When a date slips

Nothing dramatic happens, but it should be visible. A late round that is noticed and then walked is a gap in the routine, written down as such. A late round that nobody noticed is a hole in the record, and a hole cannot be filled in afterwards without inventing something. This is why due dates are worth counting per piece of equipment and per level rather than as one date for the whole site: a swing installed in March does not share an anniversary with the slide, and a list that pretends otherwise is wrong about one of them.

Lekko counts the next due date per item and per level, reminds you before it falls, and puts the right checklist in front of whoever is holding the phone. See [what a round should contain](https://lekko.tech/eu/blog/playground-inspection-checklist).

## Questions and answers

### How often must a playground be inspected?

No single figure applies across Europe. EN 1176-7 describes three levels: a frequent routine visual inspection, a less frequent operational inspection, and an annual main inspection by a competent person. The first two are set from the site's use, materials, weather and vandalism. Where a national rule exists, as in France, Belgium and the Netherlands, it asks the operator for a written plan and a logbook rather than for a number.

### Does EN 1176-7 give fixed inspection intervals?

It sets out the three levels and ties how often the first two happen to the equipment, the use and the environment of the site. Part 7 gives example frequencies for each level, and supplier pages quote them; the standard's own text is where they belong, which is why this guide does not repeat them. Lekko's 7, 75 and 365 days are the app's starting values, changed per site.

### How often is the annual main inspection needed?

Once a year, as the name says. EN 1176-7 describes it as work for a competent person, covering structure, foundations, corrosion and rot, and dimensions against the standard. More frequent rounds of your own do not shorten it or stand in for it; they make it shorter and cheaper, because last year's findings are closed and the maintenance has been done.

### Does a kindergarten playground need more frequent inspection than a courtyard?

In practice yes, because the use is heavier and the users younger. The same children on the same equipment every day, all year, wears surfacing and moving parts faster than a courtyard used at weekends. The routine visual inspection becomes a morning look, and the operational inspection moves closer than the default. See the guide on [kindergarten and day-care playgrounds](https://lekko.tech/eu/blog/playgrounds-at-kindergartens-and-day-care).

### What if we missed an inspection date?

Walk the round now and record it with today's date, not the date it was due. A late round that is visible as late is a gap in the routine; a round backdated to look on time is a false record, and that is worse than the gap. Then look at why the date slipped, because that is usually the more useful finding.

## Sources

- [EN 1176 and EN 1177 – CEN/TC 136 Sports, playground and other recreational facilities and equipment (CEN-CENELEC)](https://www.cencenelec.eu/areas-of-work/cen-sectors/consumer/sports-goods/)
- [CEN-CENELEC: European Standards, and how members adopt them nationally](https://www.cencenelec.eu/european-standardization/european-standards/)
- [Décret n° 96-1136 du 18 décembre 1996 fixant les prescriptions de sécurité relatives aux aires collectives de jeux (Légifrance)](https://www.legifrance.gouv.fr/loda/id/JORFTEXT000000550187)
- [FPS Economy (Belgium): Playground and playground equipment safety](https://economie.fgov.be/en/themes/quality-and-safety/safety-products-and-services/specific-regulations/recreational-activities/playground-and-playground)
- [NVWA: Het Warenwetbesluit attractie- en speeltoestellen (WAS) in het kort (Nederlandse Voedsel- en Warenautoriteit)](https://www.nvwa.nl/onderwerpen/attracties-en-speeltoestellen/het-warenwetbesluit-in-het-kort)
- [ČOI: Kontroly dětských hřišť a jejich zařízení (Česká obchodní inspekce)](https://www.coi.cz/kontroly-detskych-hrist-a-jejich-zarizeni/)

---

This article is published by Lekko – https://lekko.tech/eu/blog/how-often-should-a-playground-be-inspected